Blog

Toilets, car wash and forecourt lights fixed before dark

· Facilities desk

  • service-stations
  • car-wash
  • toilets
  • lighting
  • multi-site

At three on a Thursday afternoon, the console operator at a highway service station takes three complaints in an hour. The customer toilet is blocked again, the automatic car wash stopped halfway through a cycle and is showing a fault code, and the air and water machine on bay six is taking coins but not pumping. Two of the canopy lights over the far pumps flickered out last night. The site manager texts a plumber, rings the car wash company and writes “lights” on the whiteboard in the back office.

For a service station, the customer judges the whole site by the small things. A blocked toilet sends a family to the next stop down the highway. A car wash that is down on a sunny weekend is takings gone for the day. Dark pumps after sunset make the forecourt feel closed, even with the shop open. Across a network, the same afternoon can bring a toilet fault at one site, a car wash fault at another and a light out at a third, each handled by whoever is on shift.

OpsChase puts every toilet, car wash, air and water, lighting and shop fault across your sites on one board: the fault is raised with a photo against the site and the area, it goes to your own team or your contractors and is tracked until the work is done, and the area manager can see which sites still have open faults before the evening trade.

From a blocked toilet to a work order

The console operator or the site manager raises a work order from their phone against the site and the area: customer toilet blocked, car wash bay one stopped mid-cycle, air and water bay six not pumping, canopy lights out over pumps seven and eight. They add a photo and a note, and mark whether the area is closed to customers.

Someone on your own team can take the small jobs straight away, such as resetting a tripped car wash, clearing a jammed coin slot or swapping a soap dispenser, and close them on the same work order. Anything that needs a licensed trade or the car wash service company goes out to your contractors with the details already on the job, so nobody rings the site back to ask which bay it is.

OpsChase looks after the buildings, the forecourt and the people who work on them. Fuel pricing, fuel stock, point of sale and loyalty stay in the systems you already use.

Your contractors per site and per trade

The plumber who knows the toilets at your city site may not reach the highway site before the evening trade. Name your regular contractors per site and per trade, including the firm that services your car wash equipment.

The faults customers notice first

Attend-by times set around trade

Every job carries an attend-by time that fits the risk: within the hour for a toilet flooding the floor, a shop door that will not lock or exposed wiring at a pump island; before dark for canopy lights out; same day for a car wash that is down; within the week for a faded bay line.

Add a note on when the contractor can work on site: outside the morning and afternoon peaks, with a bay coned off, or after close with the manager’s sign-in. Late jobs show against your response targets, so the area manager can see which sites are still waiting before the evening trade, not after the weekend.

Compliance and site access before anyone is booked

Keep licence, public liability, induction and site-access details on file for each contractor firm through contractor compliance, so the site can check them before booking. Add site notes on where contractors sign in at the console, where to park clear of the fuel tanker path, which bays to cone off, and where the emergency fuel shut-off and the switchboard are.

Proof before the area reopens

Set proof templates per job type: before and after photos, a note from the contractor, and a certificate where electrical or plumbing work needs one. With proof of completion on the work order, the console operator knows the toilet is open again before the next coach pulls in, and the area manager knows the canopy is lit without driving out to look.

Faults that keep coming back

Some faults return every few weeks: the same toilet, the same car wash bay, the same air and water machine. With Assets & planned maintenance switched on, each car wash, air and water machine, charger, light pole and auto door keeps its own job and service history, and you can run planned maintenance such as car wash servicing, canopy light checks and grease arrestor pump-outs through scheduling on the same board as reactive jobs. When the car wash stops again, every visit is on the record, so the call between another repair and a replacement is made on what happened, not on memory.

What the area manager sees on one board

With every site on one board:

  • Faults come in with a photo, the site and the area.
  • Your own team takes the small jobs; your regular contractors take the rest for each site and trade.
  • Attend-by times put toilets, locks and lighting before cosmetic work.
  • Photos, notes and certificates are attached to the work order.
  • The area manager sees every open job across the network in one view.

For forecourt plant and shop coolers, read service stations: forecourt and shop plant closed before peak. For the wider picture across sites, read about multi-site maintenance.

Starting with one site

Pick the site with the most customer complaints. Import its toilets, car wash bays, air and water machines, chargers, lighting and shop doors, the contractor book and the trades each firm covers. Set roles for the console operator, the site manager and the area manager. Set proof templates for plumbing, electrical and car wash repairs. Raise the next toilet or car wash fault into OpsChase instead of a text, then add the next site.

Read the service stations industry page or book a demo with your site list and contractor book. Check pricing when you are ready to bring every site onto one board.

Customers will still find the odd blocked toilet. The difference is that every fault is on the board, booked to the right firm and closed before the lights need to come on.

Related on OpsChase

Questions

Who raises a toilet or car wash fault in OpsChase?
Whoever finds it: the console operator or the site manager. They raise a job from their phone with a photo, the site and the area, and note whether that area is closed to customers.
Can each site book its own contractors?
Yes. Name the regular contractor per site and per trade, including the firm that services your car wash equipment, so each job goes to the right firm for that site.
Does OpsChase hold fuel pricing, point of sale or loyalty?
No. OpsChase looks after your buildings, forecourt and equipment and the contractors who work on them. Fuel pricing, fuel stock, point of sale and loyalty stay in the systems you already use.
Can the area manager see open faults across every site?
Yes. Every open job across the network sits on one board, with the site, the area and which jobs are late against your attend-by times, so nothing waits until the weekend.

All articles

OpsChaseOpsChase

Start with the part you need today and add the rest when you’re ready. One site or many.

Book a demo