Blog

Hail damage checklist: what to check on roofs, solar and rooftop plant at every site

· Facilities desk

  • hail
  • storm-season
  • multi-site
  • facilities-maintenance
  • checklist

The storm lasted twenty minutes. By the next morning the car park is dry, the power is on and every site looks fine from the front door. Three weeks later, the first heavy downpour finds the dented roof sheet over the stockroom, the cracked skylight in the lunchroom and the box gutter still packed with ice-shredded leaves. The rooftop cooling unit with flattened fins starts struggling on the first hot afternoon of summer.

Hail damage hides. Unlike a fallen tree, most of it doesn’t stop a site opening the next day, so it gets missed until it costs more to fix. The answer is a short, consistent check at every site after each hailstorm, with every fault written down as a job.

This checklist is for operators running more than one site. It isn’t electrical, building or insurance advice. Stay off roofs during and straight after a storm, keep clear of fallen powerlines, and leave solar panels and wiring to a licensed electrician.

Why hail damage is easy to miss

  • Dents and lifted fixings leak later. A roof sheet can take a dent or a cracked fixing without leaking straight away. The leak shows up at the next heavy rain, often over stock, ceilings or switchboards.
  • Gutters clog quietly. Hail and shredded leaves pack into box gutters and downpipes. The next storm overflows them inside the building.
  • Cooling units lose capacity. Hail flattens the thin fins on outdoor condensers. The unit still runs, but works harder and cools less, just before summer.
  • Solar panels can crack without looking broken. A cracked panel can still sit in its frame, and panels stay live whenever the sun is on them.

Check from the ground first, at every site

Have someone at each site walk the outside and the inside, take dated photos, and write down what they find:

1. Roof sheets and flashings. From the ground or a safe vantage point, look for dents, lifted sheets and bent flashings. Inside, look for new stains on ceiling tiles. Book a roofing contractor to inspect from the roof. 2. Box gutters and downpipes. Check for blockages and overflow marks on walls. Book clearing before the next storm, with plumbing for any damaged downpipes. 3. Skylights, polycarbonate and windows. Look for cracks and holes in skylights, awnings and covered walkways. Get glazing to board up or replace broken glass. 4. Rooftop heating and cooling plant. Look for flattened condenser fins, dented casings and units that trip or run warm. Book your heating and cooling contractor to check and comb the fins before peak load. 5. Solar panels. Look only, from the ground. Photograph any cracked or shattered panels and have a licensed electrician or your solar contractor inspect and make them safe. Don’t touch panels, cables or isolators. 6. Signs, lighting and cameras. Check pylon and wall signage, car park and security lighting, and cameras for cracked covers and water inside. 7. Exhaust fans, vents and roof penetrations. Dented cowls and cracked vents let water in around the opening.

Make safe before the repairs

  • Tarp or contain active leaks and move stock and equipment away from them.
  • Keep water away from electrics. Anything wet near a switchboard, light fitting or power outlet is for an electrical contractor.
  • Isolate damaged signs and lights that could fall or short out, and fence off the area under them.
  • Note what you did, with times and photos, at each site.

If the hail came with a bigger storm, our storm season checklist covers fallen trees, flooding and make-safe work, and our power outage checklist covers getting each site running again.

Keep the records with each job

Hail claims can take weeks. Make-safe work should not wait, but check with your insurer before you start permanent repairs, as some policies won’t cover work they haven’t agreed. Keep dated photos, contractor inspection reports, quotes and what was repaired with each job, for each site. Your insurer may ask for photos and reports, and it’s much easier when they sit with the job instead of on six different phones.

Running hail repairs on one OpsChase board

OpsChase is one AI-powered platform for running maintenance across one site or many. After a hailstorm, every site’s damage lands in one place:

  • Anyone can raise a fault from their phone, with photos, whether it’s a site manager, a cleaner who spots a ceiling stain or the staff member opening up.
  • Jobs are booked to your own team or your contractors. Set your regular contractors per site and per trade, such as the roofer, the glazier, the electrician and the heating and cooling firm for each site, so each job goes to the right regular contractor.
  • Repairs are sorted by priority across every site, so an active leak over stock isn’t waiting behind a cracked sign.
  • Each job is tracked until the work is done, then closed with proof of completion: photos and sign-off on the work order.
  • Keep licence, public liability, induction and site-access details on file for each contractor firm through contractor compliance, so the team can check them before booking anyone onto a roof.

With Assets and planned maintenance switched on, gutter clearing, roof inspections, condenser servicing and solar inspections become planned maintenance, booked at every site on the dates you set. Those jobs sit beside your scheduling so you can see who is on shift before you book the work. Each roof, cooling unit and solar array keeps its own service history, so you can see what was done and when.

What the manager sees

Across every site, the manager sees one board:

  • Every hail fault, by site, sorted by priority.
  • Who is booked to attend each job, with photos, reports and contractor notes.
  • Which sites are fully repaired and which still have open jobs.
  • Late jobs showing against your response targets.

For more on running several sites from one view, see multi-site maintenance and facilities maintenance.

Where to start

After the next hailstorm, give each site the seven checks above and ask for dated photos the same day. This week, book gutter clearing and a condenser check at any site that took hail recently. Then see how OpsChase handles it on pricing, or book a demo with a list of your sites.

When the next storm passes, every site gets the same check, and every dent, crack and clogged gutter becomes a job on one board.

Related on OpsChase

Questions

Who raises a fault after a hailstorm?
Whoever finds it: a site manager doing the walk-around, a cleaner who spots a new ceiling stain, or the staff member opening up. They raise it from their phone with dated photos, and the job is tracked until the work is done.
How do hail repair jobs book to the right contractor per site and trade?
Set your regular contractors per site and per trade, such as the roofer, glazier, electrician and heating and cooling firm for each site, so a dented roof sheet or a cracked skylight goes to the right firm for that site and that kind of work.
What stays in our own systems?
Insurance claims, accounts, stock records and staff rosters stay in your own systems and with your insurer. OpsChase holds the maintenance side: repair jobs, planned servicing, and the photos, reports and notes that show each job was done.
What does the manager see across sites after hail?
One board with every hail fault by site, sorted by priority, who is booked to attend, which sites still have open jobs, and any late jobs showing against your response targets.

All articles

OpsChaseOpsChase

Start with the part you need today and add the rest when you’re ready. One site or many.

Book a demo