A severe storm warning comes through on a Thursday afternoon. By 6 pm the storm has passed. One site has water coming through the ceiling above the front counter. Another has a sign hanging off its bracket over the car park. A third has lost power, and nobody is sure whether the sump pump is running. The phone calls start, and every site manager is ringing someone different.
Storm season in much of Australia runs through the warmer months, from spring into autumn. You can’t stop a storm, but you can decide before it arrives what gets cleared, who checks which site, and how the damage gets fixed afterwards.
This checklist is for operators running more than one site. It isn’t insurance or engineering advice. Put the Bureau of Meteorology’s warnings, your state emergency service, your insurer and your landlord first.
Before the season: get every site ready
Work through each site, not just the one you visit most.
- Roofs, gutters and box gutters. Clear leaves and debris, and check that downpipes run clear. Clogged box gutters are a common way for heavy rain to end up inside a building. Book a roofing contractor for anything you can’t safely reach from the ground.
- Drains and stormwater pits. Clear grates in car parks, loading areas and courtyards so water has somewhere to go.
- Sump pumps and pump-out pits. Test them, and check the float switch and the alarm if there is one. A plumbing contractor can service them before the first big storm.
- Generators and standby power. If a site has a generator, have it serviced and run under load, and check the fuel. Book your generator contractor before the season rather than during it.
- Emergency and exit lighting. Check it works, because storms often take the power out after dark.
- Signs, shade sails and loose items. Check sign brackets and fixings, take down or secure shade sails, and know what outdoor furniture, bins and stock need to come inside. A signage contractor can check high or illuminated signs.
- Trees over buildings and car parks. Have overhanging branches looked at by a grounds and landscaping contractor before they come down on a roof or a car.
- Photos of every site. Take dated photos of each roof line, ceiling, sign and car park in good condition. If a storm causes damage later, you have a record of how the site looked before.
When a warning is issued: who checks which site
When the Bureau issues a severe thunderstorm warning for an area, there is often little time. Decide these things now, for each site:
1. Who acts on the warning at each site: brings in loose items, closes windows and roller doors, and moves stock away from known leak points. 2. Who checks the site afterwards, and how soon. For a site that is closed overnight or over a weekend, name the person who drives past or opens up. 3. Which contractor attends for each kind of damage at that site: roof leaks, power, flooding, broken glass and fallen trees, with their after-hours number. 4. What must keep running. Fridges and cool rooms, alarms, cameras and pumps. Write down who to call if any of them stop.
Keep this list for every site where your site managers and on-call staff can find it.
After the storm: make-safe first, then repair
Make-safe work comes first: stop water coming in, isolate damaged power, secure broken glass and doors, and fence off anything that could fall. The full repair comes after.
- Check each site and raise every fault, with photos, before anything is moved or cleaned up where it is safe to do so.
- Book make-safe jobs first, such as a tarp over a roof leak from your roofing contractor, an electrical contractor to check a tripped or damaged board, and glazing to board up a broken window.
- Then book the repairs, such as roof sheets, ceilings, signs and any water-damaged flooring.
- Keep the photos, dates and contractor reports together for each job. Your insurer may ask for them, and it is much easier when they sit with the job instead of in five phones. If the power went out too, our power outage checklist covers the restart. Hail damage often shows up weeks later; our hail damage checklist covers roofs, solar and rooftop plant.
Running storm season on one OpsChase board
OpsChase is one AI-powered platform for running maintenance across one site or many. After a storm, it puts every site’s damage in one place:
- Anyone can raise a fault from their phone, with photos, whether it’s a site manager, a cleaner opening up or the person on call.
- Jobs are booked to your own team or your contractors. Set your regular contractors per site and per trade, such as the roofer, the electrician and the plumber for each site, so each job goes to the right preferred contractor.
- Make-safe jobs and repairs are sorted by priority across every site, so a ceiling leak over a shop floor isn’t waiting behind a loose fence panel.
- Each job is tracked until the work is done, then closed with proof of completion: photos and sign-off on the work order.
- Keep licence, public liability, induction and site-access details on file for each contractor firm through contractor compliance, so the team can check them before booking anyone onto a roof.
With Assets & planned maintenance switched on, gutter cleans, sump pump servicing, generator runs and emergency lighting checks become planned maintenance on scheduling, booked before the season at every site. Each generator, pump and roof keeps its own service history, so you can see what was serviced, and when, before the storm arrived.
What the manager sees
Across every site, the manager sees one board:
- Every storm fault, by site, sorted by priority.
- Which jobs are make-safe and which are repairs, and who is booked to attend each one.
- Photos and contractor notes on each job.
- Late jobs showing against your response targets.
For more on running several sites from one view, see multi-site maintenance and facilities maintenance.
Where to start
This week, list every site and book the gutter cleans, sump pump checks and generator servicing that are due. Write down who checks each site after a warning and which contractor attends for each kind of damage. Then see how OpsChase handles it on pricing, or book a demo with a list of your sites.
When the next warning comes through, every site already knows what to do, and every job after the storm is on one board.
Closing sites over the break? Use the Christmas shutdown checklist so every site is locked up, checked and ready to reopen.
